Instructions for Multi-loading Grease Gun

Question

Accepted Answer

Follow These Steps Carefully Before Using This Gun.
How to load a grease gun cartridge.

Step 1

Unscrew the head from the barrel.

Step 2

Pull back the rod handle and lock into position. (A) Push-Lock Style: Pull the rod handle through the housing and pull into the slotted end cap.

Step 2-1

(B) Stopper Style: Pull back the rod handle to automatically lock the rod by stopper in the position.

Step 3

Remove the plastic cap from the end of grease cartridge, and insert the open end first into the barrel.

(A)

Cartridge
Loading

(B)

Dispenser
Loading

(C)

Bulk
Loading

Step 4

Screw head back onto the barrel.

Step 5

Unlock the rod handle from the end cap.
(If the rod handle is hard to release back from the end cap.slightly loosen the gun head 1-3 tums) (A) Push-Lock Style: Release the rod handle from the slotted end cap, and push down the rod handle into the barrel.

Push-Lock Style: Release the rod handle from the slotted end cap, and push down the rod handle into the barrel.

Step 5-2

(B) Stopper Style: Press the stopper to release rod handle from end cap, and at the same time push down the rod handle into the barrel.

Step 6

Unscrew gun head 1-3 turns and pump the lever handle around 6-8 times until grease comes out. This releases air pockets from barrel and makes it easy to pump the grease

Step 7

Screw the gun head tightly and ready for priming.

Trouble shooting

Problem: Gun not pumping grease
Possible causes: Air pocket between in the tube and gun head,or between in the gun head and spout.

Solution:

Take off spout from gun head.
Unscrew container tube 1-2 turns from gun head.
Pump the lever handle around 6-8 times until grease comes out.
Screw the gun head tightly.

Instructions for Multi-Loading Grease Gun